98
Printer Driver Settings
• Set a print area that is 1.5 mm larger at the top, bottom, left, and right than the paper size.
• Select Continuous paper (Blackmark) for the media form.
• Select the Borderless Printing check box.
Setting Example
This section shows an example of setting the driver for borderless printing.
Paper to be used
• Die-cut labels with waste surrounding the labels
• Label width: 60.0 mm
• Label height: 35.0 mm
Printer driver settings
• Media Form: Continuous paper (Blackmark)
• Borderless Printing: Check box selected
• Media Width: 63.0 mm
• Media Length: 38.0 mm
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
