23
Rear
5 Feed button
When the paper has no black marks or gaps between labels, pressing this button once feeds the paper
by 15 mm.
When the paper has the marks or gaps, pressing this button once feeds the paper to the next mark or
gap (the next label or page).
Pressing and holding the button feeds paper until the button is released. (Maximum of approximately
6 seconds)
6 Cleaning button
Press this button for at least 3 seconds to run a print head cleaning.
7LED
The status of the printer can be checked from a combination of the LEDs lighting/flashing and the
LCD display. This allows you to know the cause of an error and how to resolve the problem from the
printer status. (U "Checking the Printer Status" on page 68)
1 Lock lever (fanfold paper guides)
Pull up this lever to enable adjustment of the fanfold paper guides.
Pull down this lever to lock the fanfold paper guides.
2 Fanfold paper guides
These guides are for preventing the paper from getting out of position when fed into the printer.
Adjust them to match the paper width.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
Need help?
General