120
Paper Feed Adjustment
Make adjustments when the auto cut position does not match or the print start position shifts
for the paper being used.
Setting Description
Cut Position Adjustment
(U page 121)
Ad
just the cut position. The increment is 1/180 inch. This can be
adjusted within the range of -63 to 63.
Print Start Position Adjustment
(Vertical Direction)
(U page 124)
Ad
just the print start position in the vertical direction. The
increment is 1/180 inch. This can be adjusted within the range of
-63 to 63.
Print Start Position Adjustment
(Horizontal Direction)
(U page 126)
Adj
ust the print start position in the horizontal direction. The
increment is 1/180 inch. This can be adjusted within the range of
-4 to 4.
Q Note
• [dot] - [mm] - [inch] are converted as follows when 180 dpi.
1 dot - 0.1411 mm - 0.0055 inch
2 dot - 0.2822 mm - 0.0111 inch
3 dot - 0.4233 mm - 0.0166 inch
4 dot - 0.5644 mm - 0.0222 inch
5 dot - 0.7055 mm - 0.0277 inch
6 dot - 0.8466 mm - 0.0333 inch
7 dot - 0.9877 mm - 0.0388 inch
8 dot - 1.1288 mm - 0.0444 inch
9 dot - 1.2700 mm - 0.0500 inch
10 dot - 1.4111 mm - 0.0555 inch
• When the printer prints for the first time after paper feed adjustment, it
performs paper feeding and auto cutting to detect the paper position.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
Need help?
General
