Epson TM-C3500 - Paper Specifications; Paper Types and Forms

18
Paper That Can Be Used
The following shapes and forms of paper can be used with the printer.
For the detailed specifications, check "Paper Specifications" on page 165.
Paper Shapes
The following shapes of paper can be used.
Forms of Paper
The following forms of paper can be used.
*1: The print position is detected based on the black marks printed on the back or backing paper of
the paper.
*2: The print position is detected based on the gaps between labels.
Q Note
Depending on the shape of die-cut labels, the labels may peel off their
backing paper inside the printer. When you want to use die-cut labels that do
not meet the paper specifications, contact your dealer for advice.(U "Paper
Sp
ecifications" on page 165)
Roll paper Fanfold paper
Continuous paper
(without black marks)
Continuous paper
(with black marks
*1
)
Plain paper (without adhesive)
Label paper (with adhesive)
Full-page Label Die-cut label
(Gap
*2
)
Die-cut label
(BlackMark
*1
)
Downloaded from ManualsNet.com search engine