146
PRINTER ERROR ##
##: 20 to 54, 64 to 75, A9, B0 to
DA
One of the following is
occurring.
• Paper jam
• Auto cutting operation
failure
• Abnormal environment
temperature
• Failure
1. Turn the printer off. (U "Turning
the Power Off" on page 43)
2.
Open the
roll paper cover.
3. Check that no paper is jammed. If
there is a paper jam, remove the
paper.
4. Load paper again.
5. Turn the printer on. (U "Turning
th
e P
ower On" on page 42)
If
the error reoccurs, request repairs.
SERVICE REQUIRED ##
The printer internal parts
have reached the end of
their service life.
Replace the printer or request
repairs.
UPDATING The firmware update failed.
Turn the printer off and then turn it
back on. If the error reoccurs, request
repairs.
LCD display Error details Solution and Reference
Downloaded from ManualsNet.com search engine