Epson TM-C3500 - Page 187

187
When Borderless Printing Disabled
Margins at top, bottom, right, and left (inside label): 1.5 mm (typical value)
Backing paper width
0.5 to 1.0 mm
15.0 mm or more*2 18.0 mm or more*3
1.5 mm
Auto cut position
Paper feed
direction
Print area
Print area width
1.5 mm
Label
1.5 mm
1.5 mm
Paper width
center
Waste part 2.0 mm
1.5 mm
Auto cut position
Backing paper
1.5 mm
Waste part 2.0 mm
12.0 mm or more*1
Auto cut position
Perforation position
Black mark position
(back side)
1.5 mm
*1: When not auto cutting,
5.0 mm or more
*2: When not auto cutting,
8.0 mm or more
*3: When not auto cutting,
11.0 mm or more
Downloaded from ManualsNet.com search engine