5-44 Disassembly, Assembly, and Adjustments Rev. A
Main Assembly 1-4: Attachment of Solenoid-J/S Changeover and Various Gears
1.* Mount the paper feed deceleration gear and then the receipt transmission gear on the
frame-main assembly and fasten with the RE.
2.* Align the tip of the lever-J/S changeover with the groove on the J/S changeover gear.
Align the hole on the lever with the dowel on the frame-main assembly and secure the
solenoid-J/S changeover assembly with the screw.
3.* Mount the paper feed deceleration gear and then the gear-journal transmission on the
frame-main assembly, and fasten with the RE.
Frame-main assembly
Solenoid-J/S changeover assembly
CONFIDENTIAL
To Next Page
Loading...
