Operating of the Machine
4-52 © Essemtec AG Paraquda Startup & Safety
0000003/11 / November 4, 2014
Create Dispense Set
Medium
Out of the table 'Medium', select the desired or
new created medium.
to go to Properties screen.
Check all the parameters or do some necessary
changes.
Medium
Setting
Now, create or copy a complete set containing
m
edium, dispense module with valve type and
tip, with all the appropriate parameters.
If a new dispensing set was created, some
dispensing functions are not executable (e.g.
Testdot etc.) as long as step 4 has not been
performed .
To Next Page
Loading...
