A Eos Configuration Utility 315
Keyboard
Allows you to select the language for the alphanumeric keyboard within Eos. Options are English,
German, Italian, Swiss, Norwegian, Turkish, Czech, and Russian.
Show Welcome Screen
When this is checked, the Eos console will boot into the Configuration Utility every time instead of
booting directly into the main Eos application.
Backup Auto Switch
Switches to the backup automatically if the primary should go offline.
Show Archive Path
This is the default location to save show files. The full path must be typed in and specified in a legal
Windows format. The default location is a folder on the D: drive.
If you decide to change this setting, it is recommended that you keep this location on the D: drive.
This will keep your show files safe during software updates that may include re-imaging the C:
drive.
Share Show Archive
Checking this box will enable you to share the show archive folder on the console with another
console or computer.
Latitude
Allows you to select the latitude the console is using.
Longitude
Allows you to select the longitude the console is using.
Calibrate Touchscreens
This will launch a screen calibration utility to guide you through the process of re-calibrating the
touchscreens. This should be used if the pointer is consistently offset from where you are touching
the screens.
Each screen is calibrated independently.
To Next Page
Loading...
