EasyManua.ls Logo

ETC EOS - Page 57

ETC EOS
393 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3 System Basics 43
Text indicators
+ (see cue 6) . . . . . . . . .Indicates that there is discrete timing within the associated
cue. Found in the cue display “Timing” area.
* (see cue 4) . . . . . . . . . .Indicates the cue has an allfade command. Found in the cue
display “Flags” area.
A or a (see cues 3&4). . .Indicates an asserted cue. “A” indicates the entire cue is
asserted. “a” indicates a channel or parameter assert only.
Found in the cue display “Flags” area.
B or b (see cues 2 & 5). .Indicates a blocked cue. “B” indicates the entire cue is
blocked. “b” indicates a channel/parameter block only. Found
in the cue display “Flags” area.
F1 - F10 . . . . . . . . . . . . .Indicate faders numbered 1-10 on the console. Found at the
bottom of the fader display.
F9 (see in cue 8) . . . . . .Indicates a follow time associated with the cue (in this case,
9 seconds). Found in the cue display.
GM (on fader pg. 1) . . . .Indicates a grandmaster. Found in the fader display.
H4 (see cue 6) . . . . . . . .Indicates a hang time associated with the cue (in this case 4
seconds). Found in the cue display.
I (see cue 9) . . . . . . . . . .Indicates an intensity blocked cue. Found in the cue display
“Flags” area.
L3 (on fader pg. 1) . . . . .Indicates a cue list number (in this case, list 3) in the fader
display.
M or m (see cue 6) . . . . .Indicates a marked cue. “M” indicates an AutoMark or a
reference mark that is used by a subsequent cue. “m”
indicates a reference mark that is currently unused by any
subsequent cue (see Using Mark, page 189). Found in the
“Flags” area.
P (see cue 3) . . . . . . . . .Indicates the cue will preheat. Found in the cue display
“Flags” area.
R (see cue 8) . . . . . . . . .Indicates the source cue which refers back to an earlier mark
(see Referenced Marks, page 191). Found in the cue display
“Flags” area.
S2 (on fader pg. 1) . . . . .Indicates submaster number (in this case, sub 1). Found in
the fader display.
Note: For more details on information contained in the playback status display, see
Playback Status Display, page 47.

Table of Contents

Other manuals for ETC EOS

Related product manuals