Fagor CNC 8070 - Move, rotate and zoom in or out on the graphic.



 Programming manual
CNC 8070
TOOL COMPENSATION
Tool radius compensation
9.
(SOFT V02.0X)
167
ARC-TO-STRAIGHT path
When the angle between the tangent of the arc and the straight line
is smaller than or equal to 180º, the transition between the paths is
independent from the selected G136/G137 function.
When the angle between the tangent of the arc and the straight line
is greater than 180º, the way the compensated paths are joined
depends on the type of transition selected (G136/G137).
0º < α < 90º α = 90º
90º < α < 180º α = 180º
G136 G137
180º < α < 270º 180º < α < 270º
α = 270º α = 270º
270º < α < 360º 270º < α < 360º