FARO
®
Laser Scanner Manual
92
Chapter 7: Controller Software
Figure 7-67: WLAN Settings
The scanner has an integrated WLAN module that allows you to remotely
connect to the scanner with portable devices, such as notebooks, PDAs or
tablet computers. Connect your remote device to the scanner through WLAN,
and remotely access the scanner user interface with a standard web browser.
The WLAN option also provides remote access to the scan files on the
scanner SD memory card.
It is possible to turn WLAN off from a remote interface. Since this might
disable the connection to the remote interface, a warning is displayed.
Status
Tap this button to turn ON or OFF. Indicates whether WLAN is available or not
available. If WLAN is not needed, it is recommended to turn it off.
Note that changes to the WLAN settings are only possible if WLAN is turned
off.
Two different WLAN operating modes are possible:
WLAN settings can only be modified on the scanner user
interface, and not with the remote interface.
Changes to the WLAN settings are only possible if WLAN is
turned off.
To Next Page
Loading...
