User Manual LTU Orion 3
130
APR firstSUN (6 ) 02:00s +0min
MAR lastSUN (30) 01:00u +60min
OCT lastSUN (26) 01:00u +0min
MAR FRI>=23 (28) 02:00w +60min
OCT lastSUN (26) 02:00w +0min
MAR lastSUN (30) 00:00w +60min
OCT lastSUN (26) 00:00w +0min
SEP lastSUN (28) 02:00s +60min
APR firstSUN (6 ) 02:00s +0min
APR firstSUN (6 ) 02:00w +60min
OCT lastSUN (26) 02:00w +0min
OCT firstSUN (5 ) 02:00w +60min
MAR SUN>=8 (9 ) 02:00w +0min
MAR SUN>=8 (9 ) 02:00w +60min
NOV firstSUN (2 ) 02:00w +0min
OCT SUN>=21 (26) 02:00w +60min
JAN SUN>=18 (19) 03:00w +0min
MAR lastSUN (30) 01:00u +60min
OCT lastSUN (26) 01:00u +0min
<DST [WINTER/SUMMER]> Command allows manually definition for winter and summer daylight
saving time change. The following parameters must be entered in the dialog:
JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC
Day when you change time.
NN Particular month day number like 5 or 30
firstDDD First week day in the month with name
DDD. DDD is three-letter abbreviation of
day name: MON TUE WED THU FRI SAT SUN
lastDDD Last week day in the month with name DDD.
DDD>=NN A week day DDD when month day number is
>= than NN.
A moment to adjust clock. Has format HH:MM[W|S|U]
HH Hour
MM Minutes
[W|S|U] Defines Type of specified time (W if
omitted)
W Time change happens according your wall
clock, taking in account time zone offset
and current season time.
S Time change happens according with
Standard time, taking in account only
time zone offset.
U UTC time. Time change happens when UTC
clock shows specified time.
Amount of time we add to Standard zone time when
switch to specified season time.
Format is either HH:MM or MM.
Typical values are:
0 Local time will be UTC time + TZ
offset(selected with SNTP TZ command) + 0
This is so called Standard time.
1:00 Local time will be UTC time + TZ offset + 01:00
60 Same as above (60 minutes == 01:00)
In the summer time it is usually 60 and in the winter
it's 0 min.
CO_06_NET>DST SUMMER
Month [MAR] : MAY
To Next Page
Loading...
