FlexDSL ORION 3 - Monitor or Local Craft Terminal (RS-232) Interface

User Manual LTU Orion 3
159
Isolation
1500 Vrms
8.1.5 Monitor or Local Craft Terminal (RS-232) Interface
Specification
EIA-232 / V.28
Data Rate
9600 baud, asynchronous
Protocol
8 bit, no parity, 1 stop bit , flowcontrol none,
no linefeed with carriage return
Signal Level
V.28
Connector Type
DB9 female connector
8.1.6 Ethernet
Standard:
IEEE-802.3, VLAN IEEE-802.1Q, QoS IEEE-802.1P
Data Rate
10/100BaseT, Full/Half Duplex
Protocols
Data, Telnet, SNMP, WEB
Signal Level
Ethernet
MDI / MDI-X auto crossover
Supported
Auto Negotiation
Supported
Connector Type
RJ45, 8 pin
8.1.7 Digital Input / Output Interface (4I4O)
Number of Inputs per card
4
Max Input Voltage
72VDC
Isolation
2000Vrms
Output Voltage
3.3V +/- 5%
Maximal Output Current:
20mA
Number of Outputs per card
4
Maximal switching Voltage
120VDC, <1A
Maximal switching Power
<30W
Isolation
1500Vrms
Connector Type
DB26 high density female
8.2 Power Supply
Specification
ETSI ETS 300 132-2
Voltage
38-72VDC
Power Consumption @ 48VDC
(All DSL links up, Ethernet on,
Remote Power off)
Max. 5.5W, FG-PAM-SRL-2E1B/4Eth-RP, V90
Max. 6.1W, FG-PAM-SRL-2E1B/N64/4Eth-RP,V91
Max. 6.6W, FG-PAM-SR2L-4E1B/4Eth-RP,V93
Max. 7.2W, FG-PAM-SR2L-2E1B/N64/4Eth-RP,V94
Max. 8.6W, FG-PAM-SR4L-4E1B/4Eth-RP,V96
Max. 6.6W, FG-PAM-SR4L-4Eth,V98
Max. 8.2W, FG-PAM-SR4L-2N64/4Eth,V98
Max. 6.6W, FG-PAM-SR4L-4Eth-RP,V98
Max. 8.2W, FG-PAM-SR4L-2N64/4Eth-RP,V98
Remote Power per DSL channel
< 10.0W @ 120VDC/60mA
< 13.0W @ 120VDC/90mA
< 15.0W @ 120VDC/125mA