FlexDSL ORION 3 - Ssh|Telnet|Http|Https] [On;Off]

User Manual LTU Orion 3
131
Day [lastSUN] : FIRSTMON
Time to advance the clock [00:00] : 02:00
Offset (relative to Standard zone time) [60 min] : 1:00
4.6.5.110 <[SSH|TELNET|HTTP|HTTPS] [ON/OFF]>
Command allows enabling or disabling of defined service.
CO_04_NET> SSH ON
--------------------------------------------------------------------------------
Running Network Configuration
<------------------------------------- cut ------------------------------------>
Service settings :
Running/Port : TELNET, SSH(22), HTTP
Syslog servers : 255.255.255.255 255.255.255.255
SNTP servers : 255.255.255.255 255.255.255.255
RADIUS servers : 255.255.255.255:1812 255.255.255.255:1812
RADIUS secret : entered entered
--------------------------------------------------------------------------------
CO_04_NET> TELNET OFF
--------------------------------------------------------------------------------
Running Network Configuration
<------------------------------------- cut ------------------------------------>
Service settings :
Running/Port : SSH(22), HTTP
Syslog servers : 255.255.255.255 255.255.255.255
SNTP servers : 255.255.255.255 255.255.255.255
RADIUS servers : 255.255.255.255:1812 255.255.255.255:1812
RADIUS secret : entered entered
--------------------------------------------------------------------------------
CO_04_NET>
Note: Default running management servers are TELNET and HTTP
4.6.5.111 <SSH PORT [N]>
Command changes port, the SSH server listens for incoming connections.
CO_04_NET> SSH PORT 2022
--------------------------------------------------------------------------------
Running Network Configuration
<------------------------------------- cut ------------------------------------>
Service settings :
Running/Port : TELNET, SSH(2022), HTTP
Syslog servers : 255.255.255.255 255.255.255.255
SNTP servers : 255.255.255.255 255.255.255.255
RADIUS servers : 255.255.255.255:1812 255.255.255.255:1812
RADIUS secret : entered entered
--------------------------------------------------------------------------------
CO_04_NET>
4.6.5.112 <SSL [SHOW/DEL] [options]>
Command displays or deletes certificate or private key from the memory.
CP_01_NET>SSL SHOW KEY
<-----BEGIN RSA PRIVATE KEY-----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