132
Appendix III：Connect the TS680 series and PDA with
serial port
1. Connect the TS 680 series and PDA(Here we will take Carlson Explorer as
a example) with RS-232C cable
2. Refer to the chapter 3.8.3 Communication Port Setting to set the
parameters on TS 680 series. And then set the instrument at basic
measurement mode, as followings shown:
Meas PC 0
ppm 0
SD
VA 302.5432gon I
HA 85.8888gon P1
DIST S H V 0SET CORD
To Next Page
Loading...
