Foif RTS680 Series - Repetition Angle Measurement

68
18. Repetition Angle Measurement
Repetition angle measurement can be done by horizontal angle right measurement mode.
1. Press F2: [
MENU] on P2 of the basic measurement
mode.
2. Turn to P2, select
6.Repeat Measure.
3. Press the F3:[Yes] key.
4. Collimate the target A and press the F1[0SET]
key.
5. Press the F3:[Yes] key.
6. Collimate the target B using the horizontal clamp
and tangent screw.
Press the F4:[HOLD] key.
7.Recollimate the target A using the horizontal clamp
and tangent screw, and press the F3:[FREE] key.
8. Recollimate the target B using the horizontal clamp
and tangent screw, press the F4:[HOLD] key.
9. Repeat 7 to 8 to measure the desired number of
repetition.
Menu P2
1.Point projection
2.Line stake out
3.Traverse
4.Inverse
5.Polarize
6.Repeat Measure
7.Arc staking out
Angle Remeasure
>OK?
---- ---- YES N O
Angle Remeasure [0]
Ht: 0°00′00″
Hm:
0SET MEAS FREE H O L D
Angle Remeasure [1]
Ht: 45°10′00″
Hm: 45°10′00″
0SET MEAS FREE H O L D
Angle Remeasure [1]
Ht: 45°10′00″
Hm: 45°10′00″
0SET MEAS FREE H O L D
Angle Remeasure [2]
Ht: 90°20′00″
Hm: 45°10′00″
0SET MEAS FREE H O L D