66
16. Inverse
The distance and azimuth from a start point to an end point could be calculated according
to input their coordinates.
Input: Output:
Coordinate of start point: N0,E0,Z0 Distance: D
Coordinate of end point : N1,E1,Z1 Azimuth: Az
【Procedure of Inversing】
1. Press F2: [
MENU] on P2 of the basic measurement
mode.
2. Turn to P2, select “
4.Inverse”.
3. Input coordinates of the start point, and press F3:
[
REC] to record the data in the list if necessary. You
could press F1: [
READ] to read the existed data. Press
F4: [
OK] to set.
4. Input coordinates of the end point. See the previous
step.
5. The inversed value will display. Press F3: [NEXT]
to continue, press F4: [
OK] back to menu mode.
Coord Inverse
Start point
N 1000.000
E 1000.000
Z 39.383
Pt#
READ REC 0OK0
Menu P2
1.Point projection
2.Line stakeout
3.Traverse
4.Inverse
5.Polarize
6.Repeat Measure
7.Arc staking out
Coord Inverse
End point
N 1000.000
E 1000.000
Z 10.000
Pt#
READ REC 0OK0
Coord Inverse
Azimuth -0.0002gon
HD 0.000ft
VD -29.383ft
NEXT 0OK0
To Next Page
Loading...
