Foif RTS680 Series - Page 53

47
5. Sight the 2
nd
target, press F1: [MEAS] and
measured data will display, press F4: [
OK] to accept
this value.
6. Input the distance from 2
nd
point to the target point
and press key {
ENT}, the angle and distance of the
target point are displayed.
7. Press F1: [
REC] to save;
Press F2: [
NEZ] to display NEZ coordinate;
Press F3: [
NO] back to step 6;
Press F4: [
YES] back to offset mode.
Offset/2Dist
SD 13.511m
VA 346.9636gon
HA 249.0298gon
REC NEZ M NOS YES
Observe 2nd offset
N 10.186
E 10.000
Z 10.000
VA 90.0000gon
HA 64.5154gon
MEAS MOKS
Dist 123456789m