Infratec™ 1241 Grain Analyzer
Service Manual 1001 5015 / Rev. 4 1:1
1 Important Instructions
1.1 General
This Service Manual contains descriptions, installation instructions, maintenance
instructions, troubleshooting, specifications and schematics for the Infratec™ 1241
ISW 5.xx. Service of Infratec™ 1241 should only be done by authorized personnel.
NOTE: This manual covers the Infratec 1241 Generation 2 and 3
only. For reference to the Infratec 1241 Generation 1 and Infratec
1256 use Service Manual p/n 10012177.
1.2 Service Documents
This Service Manual is a part of the Service USB (if available) which contains the
complete support documentation for this product. The Service USB may contain
additional information in the form of animations for the purpose of illustrating and
explaining e.g. working principles, process flows and service and adjustment
procedures. See also section 8 Document References for an overview of User and
Service Documentation.
1.3 Self-Service Support
The Customer Support Toolbox (CST) on FOSS EXTRAnet (www.foss.dk) contains
all available support information. Please visit the CST at regular intervals for latest
updates of documents and software.
1.4 Contacting Customer Support
For support on this product, please contact the responsible Technical Support
engineer at FOSS or file a support request in the Global HelpDesk on FOSS
EXTRAnet.
1.5 ESD Information
Parts of this instrument, e.g. PCBs, are sensitive to Electro Static Discharge (ESD).
All sensitive parts should be handled using ESD protection.
Follow these rules for effective ESD protection:
• Handle all ESD sensitive parts with an ESD wrist band connected to earth.
• Transport all ESD sensitive parts in ESD protected bags or boxes.
• Check your ESD protection at regular intervals to secure its function and quality.
To Next Page
Loading...
Need help?
General
