Foss Infratec 1241 Service Manual

Infratec™ 1241 Grain Analyzer
Service Manual 1001 5015 / Rev. 4 5:61
5.4.5 Replacement of Locking Guide
Test Weight Control Kit P/N 1001 1779
Additional tools:
• 2 mm allen key
• 2.5 mm allen key
1. Remove the drawer.
2. Remove the old locking guide together with the screw 1 using a 2.5 mm allen
key.
Fig. 5:61 Removing old locking guide
3. Log into the service menu. Open the bottom shutter.
4. Apply locking compound on the new screw. Fit the new locking guide using a 2
mm allen key. Do not tighten the screw yet.
5. Close the bottom shutter from the service menu.
1 Screw

Foss Infratec 1241 Specifications

General

Brand	Foss
Model	Infratec 1241
Category	Measuring Instruments
Language	English