FP Mailing Solutions optimail 30 - 10 Loading postage - TELESET; Loading Postage via TELESET

optimail 30 Operator Manual
56
10 Loading postage – TELESET
TELESET is the loading of the desired postage credit via modem. The modem is inte-
grated into the optimail 30. To load postage you dial the Teleset data center (TDC)
with the optimail 30 and call the desired amount. Billing occurs according to your con-
tract with the United States Postal Service.
Regular contact with the Teleset data center
For reasons of safety the United States Postal Service demands that the postage
meter connect with the Teleset data center at regular intervals.
The optimail 30 issues a message when a contact with the Teleset data center is due.
You must then start TELESET as usual. Simply load a sum of $ 0 if you do not need
any postage for the time being.
The optimail 30 will disable vital functions until a contact with the Teleset data center
could be established if you fail to react to the message within an adequate period of
time. Please contact the Francotyp-Postalia Service if you have any questions.
Loading postage
The optimail 30 must be connected to the
telephone line for the duration of the loading
process. Make sure the modem dialing prop-
erties and the Teleset data center (TDC) tele-
phone number are set correctly.
• Press the key.
• Select TELESET to call up the loading
procedure.
• Accept the amount to be loaded
or
use CHANGE to open the menu for the
amount to be loaded. Type the desired
amount.
• Confirm with LOAD.
Change
Type amount to load: $ 100
Teleset
Load
If desired: