optimail 30 Operator Manual
30
4.5 Imprint offset
The optimail 30 prints the meter imprint at a
fixed offset to the right letter edge. You can
increase this offset and thus shift the meter
imprint to the left by adjusting the imprint off-
set.
Caution! The imprint offset set also applies
to imprinting of labels and all other print
functions (printing of lists, incoming mail
stamps…).
In the home menu:
• Press the key next to .
• Type the desired value
(0 mm = default position without offset).
• SAVE the imprint offset.
The optimail 30 returns to the home menu.
The imprint offset is set and remains effective
until it is changed – even if the machine is
switched off.
Quick results for the advanced user.
In the home menu:
• Type the desired imprint offset value.
• Confirm with the key next to .
To Next Page
Loading...
