FP Mailing Solutions optimail 30 - 14.2 Changing the ribbon cassette

optimail 30 Operator Manual
86
14.2 Changing the ribbon cassette
Caution! Only use original ribbon cassettes from Francotyp-Postalia.
• Open the flap of the ribbon cassette com-
partment by lightly pressing the release
catch.
The flap swings up automatically.
• Holding it as shown in the illustration pull
out the used ribbon cassette in arrow
direction.
• Take the new ribbon cassette from the
packing.
A cardboard strip may be present in the
ribbon cassette as transport fixture (see the
illustration).
• If present: Remove the cardboard strip.
• Tension the ribbon. Turn the white ribbon
spool in the direction of the arrow.
Transport fixture
(cardboard strip)
Ribbon spool