optimail 30 Operator Manual
78
Modem parameters – possible settings and their meaning
Phone type DIRECT LINE optimail 30 is connected to a direct line.
EXTENSION optimail 30 is connected to an
extension.
Access method
(only with phone type
extension)
EXCHANGE DIGIT Defines how the exchange is dialed from
the extension.
Usually you would dial EXCHANGE
DIGIT.
The hook flash time of the integrated
modem has been fixed to 500 ms.
HOOK FLASH
Exchange digit The exchange digit
depends on the
telephone system.
Use the numeric keys to type the
exchange digit. The exchange digit can
comprise several digits.
Normally, a “0” is used.
A W indicates the
modem waits for the
dialing tone.
Use WAIT to define waiting for the dial-
ing tone after the exchange digit was
dialed.
A comma (,) indicates a
dialing pause.
Use PAUSE to insert a dialing delay of
2 seconds.
To Next Page
Loading...
