PostBase Vision
158
Letter transport
does not start.
PostBase Vision does not display the Home
screen / the “Automatic Feeding” pop-up
(see chapter 6.3.3.4).
Letter transport stops / pro-
cessing is interrupted.
Jam. Carefully read the displayed information.
On how to clear a letter jam, please read
chapter 17.3.
The batch counter is active. After the pre-set
number of mail pieces have been processed,
PostBase Vision will automatically stop
(see chapter 6.3.3.5).
PostBase Vision signals a jam
although no letters are in the
letter path.
The sensors (light barriers) are soiled.
Clean the sensors (see chapter 16.2, page 122).
Issue Possible cause and remedy
To Next Page
Loading...
