133
EN
The Error menu
The Error menu Notifications, warnings and errors are shown on the display with the corresponding num-
ber.
If an error occurs, the Error menu is always in the foreground.
Pressing the right adjusting dial opens the Error menu on "confirm".
Pressing the right adjusting dial a second time confirms the error; the Error menu closes.
By turning the right adjusting dial you can navigate between "Cause", "Solution" and
"Hide".
If you select "Cause" or "Solution", the corresponding description is displayed when the
right adjusting dial is pressed.
Turn the left or right adjusting dial to scroll through the displayed text.
Pressing the right adjusting dial takes you back to the Error menu.
If you select "Hide", the Error menu closes, however, the error will not be reset. The top
right LED flashes on the display to show that there is a hidden, not reset error. The error
can now be called up as the first entry in the Setup menu.
To enter the Setup menu, press the "Welding process" and "Mode" buttons at the same
time.
To Next Page
Loading...
Need help?
General
