57
EN
Inserting/replac-
ing feed rollers
In order to achieve optimum wire electrode feed, the feed rollers must be suitable for the
diameter and alloy of the wire being welded.
NOTE!
Only use feed rollers that are suitable for the wire electrode.
An overview of the feed rollers available and their possible areas of use can be found in
the spare parts lists.
CAUTION!
Risk of injury if the feed roller holders fly upwards.
► When unlocking the lever, keep fingers away from the area to the left and right of the
lever.
1 2
3 4
1
2
3 4
To Next Page
Loading...
Need help?
General
