Fronius TPS 270i C User Manual

78
using the right adjusting dial:
Welding voltage
1)
in V
Setting range: depends on the welding process and welding program selected
Pulse/dynamic correction
for influencing the short-circuiting dynamic at the instant of droplet transfer
Setting range: 0 - 10
Factory setting: 0
0 ... harder and more stable arc
10 ... soft and low-spatter arc
Special function
any parameter can be assigned to this (see page 41)
The function can be selected if a parameter has been saved.
Explanation of
footnotes
1) Synergic parameter
When a synergic parameter is changed, the synergic function automatically chang-
es all other synergic parameters to match.
The actual setting range depends on the power source and wirefeeder used and
on the welding program selected.
2) The actual setting range depends on the welding program selected.
3) The maximum value depends on the wirefeeder used.
4) Only in the LSC and PMC welding processes

Fronius TPS 270i C Specifications

General

Brand	Fronius
Model	TPS 270i C
Category	Welding System
Language	English