22
Warning notices
on the device
Warning notices and safety symbols are affixed to power sources with the CSA test mark
for use in North America (USA and Canada). These warning notices and safety symbols
must not be removed or painted over. They warn against incorrect operation, as this may
result in serious injury and damage.
*) on the inside of the device
Welding is dangerous. The following basic requirements must be met to ensure the equip-
ment is used properly:
- Anyone performing automated welding must be sufficiently qualified
- Suitable protective equipment must be used
- All persons not involved must be kept at a safe distance from the wirefeeder and the
welding process
*)
*)
To Next Page
Loading...
Need help?
General
