21
EN
General
Device concept
The TPS 270i C MIG/MAG power source is
a completely digitised, microprocessor-
controlled inverter power source with integ-
rated 4-roller wire drive.
The modular design and potential for sys-
tem add-ons ensure a high degree of flexi-
bility.
Its compact design makes the TPS 270i C
particularly suitable for mobile applications.
The power source can be adapted to any
specific situation.
Functional princi-
ple
The central control and regulation unit of the power sources is coupled with a digital signal
processor. The central control and regulation unit and the signal processor control the en-
tire welding process.
During the welding process, the actual data is measured continuously and the device re-
sponds immediately to any changes. Control algorithms ensure that the desired target
state is maintained.
This results in:
- a precise welding process
- exact reproducibility of all results
- excellent weld properties.
Application areas The devices are used in trade and industry for manual applications with classical steel, gal-
vanised sheets, chrome/nickel and aluminium.
The integrated 4-roller wire drive, high performance and low weight of the power source
makes it the ideal choice for portable applications on building sites or in repair workshops.
To Next Page
Loading...
