43
EN
Select the desired parameter or the desired parent folder in the Setup menu
Further information on the Setup menu can be found from page 89
To assign the selected parameter or folder to the Favourites button, press the Favour-
ites button for approx. 3 seconds
Next to the parameter or folder and a tick are shown:
The selected parameter or folder is now assigned to the Favourites button.
Retrieving favourites
Parameters or folders stored under the Favourites button can be retrieved in any setting,
except for when the Setup menu is active.
Ongoing selection processes or called up jobs are cancelled when favourites are retrieved.
Briefly press the "Favourites" button (< 3 seconds)
The LED on the Favourites button lights up and the stored parameter or folder is shown on
the display.
To end retrieval of the favourite, briefly press the Favourites button again (< 3 sec-
onds)
The LED on the Favourites button goes out and the display switches to the welding param-
eters.
Deleting favourites
Press the Favourites button for at least 5 seconds:
The stored parameter or folder is deleted and and X are shown on the display:
1
2
1
2
1
To Next Page
Loading...
Need help?
General
