10 System Settings
306
System Settings
10
îš„Use Closest Size
Replaces with the closest paper size to that selected, and prints. If necessary, the printing is
automatically reduced in size.
Note • If there is a client specification, the client specification takes precedence.
îš„Select Tray 5 (Bypass)
Replaces with the paper in the Tray 5 (Bypass).
Paper Type Mismatch
Set the action to be taken when the paper type loaded in the paper tray does not match that
specified.
îš„Print
Prints with the paper loaded in the tray.
îš„Display Confirmation Screen
A confirmation screen appears to show procedures.
îš„Display Paper Supply Screen
The [Paper Supply] screen appears to change the paper type of the selected tray.
Unregistered Forms
Set whether to print a job or not if a form specified for printing in a form data file (overlay
printing) is not registered on the machine. If you specify [Print], since the specified form is not
present, only the data is printed.
This setting is added to the print settings menu when there is a print specification from the
host computer.
Print User ID
When printing using a print driver, specify whether to print user identification information on
paper. The first 64 letters of the user information is printed.
Select a position to print from [Top Left], [Top Right], [Bottom Left], and [Bottom Right].
Note • To use the Print User ID feature, the user ID must be set on the print driver
beforehand. For more information, refer to the print driver's online help.
• When user authentication information is not available, "Unknown User" is printed.
Banner Sheet
Select whether to output banner sheets to separate different outputs.
A user name and document name are printed on a banner sheet.
Note • Even if the stapler feature is enabled, banner sheets are not stapled.
• On a print job from a Macintosh, the document name does not appear on the banner sheet.
• When printed, banner sheets are counted by meter.
îš„Off
Does not print banner sheets.
îš„Start Sheet
Prints a banner sheet before a print job.
îš„End Sheet
Prints a banner sheet after a print job.
îš„Start Sheet & End Sheet
Prints a banner sheet before and after a print job.
Banner Sheet Tray
Set the paper tray used for banner sheets.
Select from [Tray 1] to [Tray 4].
To Next Page
Loading...
Need help?
General
