Print Mode Settings
307
System Settings
10
PostScript Default Color
Set the default values for AdobePS and PDF color mode.
Note • This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
PostScript Paper Supply
Select whether the PostScript DMS (Deferred Media Selection) feature is enabled or
disabled.
Note • This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
PostScript Font Absence
Set the action to be taken when a PostScript font specified in a job is not present.
Note • This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
îš„Cancel Printing
Cancels printing.
îš„Substitute Font and Print
Continues printing, using a substitute font. Courier is used as the substitute font.
If a Japanese font is replaced with the substitute font, it cannot be printed properly. When
printing with a Japanese font, select [Use ATCx] in [PostScript Font Substitution].
PostScript Font Substitution
Set whether to use ATCx as a substitute if a PostScript font specified in a job is not present.
The ATCx feature is used to print a job by replacing a specified Japanese font with the
Japanese PostScript font if the specified font is not installed on the machine.
Note • This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
To Next Page
Loading...
Need help?
General
