Fuji Xerox ApeosPort-II C4300 - Page 471

Error Code
469
Problem Solving
15
007-281
O [Cause] Tray 1 malfunction
[Remedy] Contact our Customer Support Center. Any trays other
than the Tray 1 can be used.
007-282
O [Cause] Tray 2 malfunction
[Remedy] Contact our Customer Support Center. Any trays other
than the Tray 2 can be used.
007-283
O [Cause] Tray 3 malfunction
[Remedy] Contact our Customer Support Center. Any trays other
than the Tray 3 can be used.
007-284
O [Cause] Tray 4 malfunction
[Remedy] Contact our Customer Support Center. Any trays other
than the Tray 4 can be used.
007-291
O [Cause] Tray 3 (high capacity) malfunction
[Remedy] Contact our Customer Support Center. Any trays other
than the Tray 3 (high capacity) can be used.
007-293
O [Cause] Tray 4 (high capacity) malfunction
[Remedy] Contact our Customer Support Center. Any trays other
than the Tray 4 (high capacity) can be used.
007-401
O [Cause] It is time to replace the feed roller for Tray 1.
[Remedy] Contact our Customer Support Center.
007-402
O [Cause] It is time to replace the feed roller for Tray 2.
[Remedy] Contact our Customer Support Center.
007-403
O [Cause] It is time to replace the feed roller for Tray 3.
[Remedy] Contact our Customer Support Center.
007-404
O [Cause] It is time to replace the feed roller for Tray 4.
[Remedy] Contact our Customer Support Center.
007-406
O [Cause] It is time to replace the feed roller for Tray 1.
[Remedy] Contact our Customer Support Center.
007-407
O [Cause] It is time to replace the feed roller for Tray 2.
[Remedy] Contact our Customer Support Center.
007-408
O [Cause] It is time to replace the feed roller for Tray 3.
[Remedy] Contact our Customer Support Center.
007-409
O [Cause] It is time to replace the feed roller for Tray 4.
[Remedy] Contact our Customer Support Center.
Error Code
Category
Cause and Remedy
CPFSMO
* If the error persists after following the listed solution, contact our Customer Support Center. The contact number is
printed on the label or card attached on the machine.