EasyManuals Logo

Fuji Xerox ApeosPort-II C4300 User Manual

Fuji Xerox ApeosPort-II C4300
635 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #481 background imageLoading...
Page #481 background image
Error Code
479
Problem Solving
15
016-705
O O [Cause] One of the following may be the cause:
1) You have specified the mailbox registry for scanned
document to the machine, however, the optional Simple
Scan Kit or the optional E-mail Kit may not be installed.
2) You have not used the print driver for this machine.
[Remedy] For 1), press the <All Services> button, and check if [Scan
to PC] is displayed. If [Scan to PC] is displayed, then
check if the scanned document can be stored in the
mailbox. If unable to store in the mailbox, install the
optional Simple Scan Kit, or optional E-mail Kit.
For 2), use the print driver appropriate for this machine.
If the error persists after following the listed solutions,
contact our Customer Support Center.
016-706
O [Cause] The hard disk space is insufficient because Secure Print
users exceeded the allowed number.
[Remedy] Remove unnecessary documents from the machine, and
delete unnecessary Secure Print users.
For information about Secure Print, refer to "Secure Print" (P.360). For
information about mailboxes, refer to "Printing/Deleting Documents in the
Mailbox" (P.208).
016-707
O [Cause] Unable to print with the Sample Print feature because a
HDD is unattached or defective.
[Remedy] A HDD is required for the Sample Print feature. If the HDD
is defective, contact our Customer Support Center.
016-708
O [Cause] Unable to annotate due to insufficient hard disk space.
[Remedy] Remove unnecessary data from the hard disk to increase
free disk space.
016-710
O [Cause] Unable to register the Delayed Print document because a
HDD is unattached.
[Remedy] A HDD is required for the Delayed Print feature.
016-711
OORefer to 016-985.
016-712
O Refer to 003-751.
016-713
O [Cause] The input password does not agree with the password set
to the mailbox.
[Remedy] Input the correct password.
016-714
O [Cause] The specified mailbox does not exist.
{Remedy] Create a new mailbox or specify an existing mailbox.
016-716
O [Cause] Unable to spool TIFF file due to insufficient hard disk
space.
[Remedy] Remove unnecessary documents and users from the
machine, and then attach the hard disk. For information on
attaching the hard disk, contact our Customer Support
Center.
Refer to "Printing/Deleting Documents in the Mailbox" (P.208).
Error Code
Category
Cause and Remedy
CPFSMO
* If the error persists after following the listed solution, contact our Customer Support Center. The contact number is
printed on the label or card attached on the machine.

Table of Contents

Other manuals for Fuji Xerox ApeosPort-II C4300

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox ApeosPort-II C4300 and is the answer not in the manual?

Fuji Xerox ApeosPort-II C4300 Specifications

General IconGeneral
BrandFuji Xerox
ModelApeosPort-II C4300
CategoryPrinter
LanguageEnglish

Related product manuals