Fuji Xerox ApeosPort-II C4300 - Page 563

Specifications
561
Appendix
16
C Finisher Specifications
C Finisher with Booklet Maker Specifications
Paper size/Supported
paper
Maximum: A3, Minimum: B5
64 - 128g/m
2
Tray capacity A4: 1,000 sheets, B4 or larger: 500 sheets, Mixed stack*: 300
sheets
* Larger size paper is stacked on top of smaller size paper.
Important • When using Xerox P paper
Staple Maximum stapled sheets:50 sheets (64g/m
2
or less)
Paper size : Maximum A3, Minimum B5
Stapling position : 1 place (front/back, angled stapling),
2 places (parallel stapling)
Important • When using Xerox P paper
Dimensions/Weight Width 571.0 × Depth 585.0 × Height 1,042.0mm, 35kg
Space requirements
(when connected to the
main unit)
ApeosPort-II C4300/C3300/C2200:
Width 1,504.0 × Depth 794.0mm (main unit + B Finisher)
DocuCentre-II C4300/C3300/C2200:
Width 1,504.0 × Depth 794.0mm (main unit + B Finisher)
Tray type Output tray × 1 : Collate/Stack
Finisher tray × 1: Collate (offset stacking available)/
Stack (offset stacking available)
Paper size/Supported
paper
Output tray Maximum: 12×18", Minimum: postcards, 55-220g/m
2
Finisher tray Maximum: 12×18", Minimum: B5, 64-220g/m
2
Tray capacity Output tray A4: 500 sheets
Finisher tray A4: 3,000 sheets, B4 or larger: 1,500 sheets,
Mixed stack*: 300 sheets
* Larger size paper is stacked on top of smaller size paper.
Important • When using Xerox P paper
Staple Maximum stapled sheets:50 sheets (90g/m
2
or less)
Paper size : Maximum: 11
×
17", Minimum: B5
Stapling position : 1 place (front/back, angled stapling),
2 places (parallel stapling)
Important • When using Xerox P paper
Punching Size suitable for punching : Maximum: 11 × 17", Minimum: B5
Number of punching holes: 2 or 4, 3 (optional)
Important • When using Xerox P paper
Dimensions/Weight Width 730.0 × Depth 660.0 × Height 995.0mm, 60kg
Space requirements
(when connected to the
main unit)
ApeosPort-II C4300/C3300/C2200:
Width 1,786.0 × Depth 794.0mm (main unit + C Finisher)
DocuCentre-II C4300/C3300/C2200:
Width 1,786.0 × Depth 818.0mm (main unit + C Finisher)
Tray type Output tray × 1 : Collate/Stack
Finisher tray × 1: Collate (offset stacking available)/
Stack (offset stacking available)
Booklet tray × 1
Paper size/Supported
paper
Output tray Maximum: 12×18", Minimum: postcards, 55-220g/m
2
Finisher tray Maximum: 12×18", Minimum: B5, 64-220g/m
2
Booklet tray Maximum: 11×17", Minimum: 8.5×11", 64-90g/m
2