Fuji Xerox ApeosPort-II C4300 - Page 564

16 Appendix
562
Appendix
16
Side Tray Specifications
Duplex Kit Specifications
Tray capacity Output tray A4: 500 sheets
Finisher tray A4: 1,500 sheets, B4 or larger: 1,500 sheets: Mixed
stack*: 300 sheets
Booklet tray 20 sets
* Larger size paper is stacked on top of smaller size paper.
Important • When using Xerox P paper
Staple Maximum stapled sheets: 50 sheets (90g/m
2
or less)
Paper size : Maximum:11×17", Minimum: B5
Stapling position : 1 place (front/back, angled stapling),
2 places (parallel stapling)
Important • When using Xerox P paper
Punching Size suitable for punching : Maximum: 11×17", Minimum: B5
Number of punching holes: 2 or 4, 3 (optional)
Important • When using Xerox P paper
Center binding/folding Maximum number of sheets: 15 sheets (center binding),
5 sheets (center folding)
Paper size : Maximum: A3, 11×17",
Minimum: A4, 8.5×11"
Paper type : 64-90g/m
2
Important • When using Xerox P paper
Dimensions/Weight Width 870.0 × Depth 660.0 × Height 995.0mm, 90kg
Space requirements
(when connected to the
main unit)
ApeosPort-II C4300/C3300/C2200:
Width 1,846.0 × Depth 818.0mm (main unit + C Finisher)
DocuCentre-II C4300/C3300/C2200:
Width 1,846.0 × Depth 818.0mm (main unit + C Finisher)
Paper size Same as the main unit
Paper feed capacity 200 images
Important • When using Xerox P paper
Output method Side-1 face up
Minimum space
requirements
ApeosPort-II C4300/C3300/C2200:
Width 1,021.0 × Depth 794.0mm (main unit + Side Tray)
DocuCentre-II C4300/C3300/C2200:
Width 1,021.0 × Depth 794.0mm (main unit + Side Tray)
Paper sizes for auto 2-
sided copying
A5, A4, A4 , A3, B5, B5 , B4, 8.5×11", 8.5×11" ,
8.5×13", 8.5×14", 11×17"
Paper loaded in the Trays 1 to 4 is available for the auto 2-sided
copying.
Paper weight 64-105g/m
2