Copy
61
Copy
3
îš„Color
Copies are made in full color using all the four colors of toner: yellow, magenta, cyan,
and black.
îš„Black
The machine makes copies in black and white regardless of the colors in the original
document.
îš„Dual
The machine makes copies of color documents in two preset colors.
You can change the colors to display. For information on the setting procedures, refer to "Dual - Target
Area Color" (P.294) and "Dual - Non-target Area Color" (P.294).
îš„More...
Displays the [Output Color] screen.
[Output Color] Screen
You can copy in full color, dual color, and single color.
1 Select [More...].
2 Select the desired output color type
for copying.
îš„Auto Detect
The machine automatically determines the color of the original document and makes
copies in full color if the original document is color and in a single color (black) if the
document is black-and-white.
îš„Color
Copies are made in full color using all the four colors of toner: yellow, magenta, cyan,
and black.
îš„Black
The machine makes copies in black and white regardless of the colors in the original
document.
îš„Dual Color
The document is separated into specified source colors and unspecified colors and
then copied in the specified dual colors. If you select [Dual Color], you can set the
following items:
z
Source Color
The [Source Color] screen is displayed.
Refer to "[Source Color] Screen" (P.62).
z
Target Area Color
The [Target Area Color] screen is displayed.
Refer to "[Target Area Color] Screen" (P.62).
z
Non-target Area Color
The [Non-target Area Color] screen is displayed.
Refer to "[Non-target Area Color] Screen" (P.62).
To Next Page
Loading...
Need help?
General
