4 Machine Status
110
Machine Status
4
For information on setting whether to print the report automatically, refer to "Broadcast/Multi-Poll
Report" (P.145).
Multi-poll Report
You can check the result of a multi-poll communication (polling from multiple
recipients). The remote terminal name and transmission result/status are recorded.
If you set to print this report automatically, it is printed each time a multi-poll
transmission is completed.
For information on setting whether to print the report automatically, refer to "Broadcast/Multi-Poll
Report" (P.145).
Overwrite Hard Disk
You can check the overwriting status of the hard disk. "Overwriting" indicates that the
overwriting is in progress. "Standby" indicates that the overwriting is completed.
Note • This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
• [Overwrite Hard Disk] appears when [Overwrite Hard Disk] is enabled under [Authentication/
Security Settings]. For more information, refer to "Overwrite Hard Disk" (P.247).
1 Select [Overwrite Hard Disk].
2 Check the overwriting status of the hard disk.
Print Mode
You can print the programming settings configured in the ESC/P-K emulation mode
and retrieve the programming.
Note • The items displayed vary depending on the options installed.
1 Select [Print Mode].
2 Select [Off-line] or [On-line].
îš„Off-line
The machine does not accept data from a computer. Any data being sent is cancelled
and not printed.
îš„On-line
The printer accepts data from a computer.
To Next Page
Loading...
Need help?
General
