Fuji Xerox DocuPrint CM505 da - Printable Area

Printable Area
505
Appendix
14
Printable Area
This section describes the area on paper that can be printed.
Standard Printable Area
The standard printable area is the area of a sheet of paper excluding the 4.0 mm
margins on all four edges of paper.
Extended Printable Area
When you select the extended printable area setting for printing, you can expand the
width and length of the printable area to 210.9 x 351.6 mm and the print assured area
to 207.9 x 347.6 mm.
Note • To extend the printable area, change the PCL print driver setting, or the [Print Area] setting
on the touch screen.
For more information on the setting method on the print driver, refer to the help provided for the print
driver. For more information on the setting on the control panel, refer to "Print Area" (P.184).
When the paper width is less
than 8.5 inches (Legal)
Print/Copy
Printable area/
Guaranteed
print area
2 mm
2 mm2 mm
4 mm
Fax
2 mm2 mm
Printable area/
Guaranteed
print area
2 mm
4 mm
Unprintable area
Unprintable area