5 Tools
230
Tools
5
îš„TIFF-J
Select this profile for sending documents in JBIG.
When the [Delete Entry] Button is Selected
Selecting this button deletes all the information registered for the address selected. To delete
all information registered, select [Delete].
Important • Deleted information cannot be restored.
Create Fax Group Recipients
You can register addresses for broadcast transmission as a group. Each group can
include up to 20 address numbers. The maximum number of groups that can be
registered is 50.
Note that recipients to be added to a group must be registered in the speed dials on the
Address Book.
Note • Even when the speed dial number of fax recipients (address book entries) are included in a
group, the machine does not send faxes to the recipients if their address types are set to [E-
mail] or [Server].
• You cannot include a group in another group.
• You can use wildcards for specifying the numbers in the last one or two digits as shown in
the following example:
- 001∗: Specifies the 10 addresses with address numbers 0010 to 0019.
- ∗∗∗∗ : Specifies all address numbers.
1 Select [Create Fax Group Recipients].
2 Select a group number to register.
Note • Select [ ] to display the previous screen
or [ ] to display the next screen.
3 Select [Group Name] and enter a group
name to register, and then select [Save].
4 Enter a speed dial number (four digits) to
register with the numeric keypad, and then
select [Add to this Group].
5 Repeat step 4 to register the address
numbers.
6 Select [Save].
To Next Page
Loading...
Need help?
General
