3 Maintenance
90
Maintenance
3
Adjusting Color Registration
Allows you to calibrate the color registration automatically or manually.
Important • The color registration is automatically adjusted and usually without any user action.
However, if the misregistration becomes large during the next automatic adjustment from the
last adjustment, you can adjust the color registration using this feature.
Auto Color Registration
1
Press the <Log In/Out> button.
2 Enter the system administrator’s user ID with
the numeric keypad or the keyboard
displayed on the screen, and select [Enter].
When a passcode is required, select [Next]
and enter the system administrator’s
passcode, and select [Enter].
Note • The default user ID is "11111".
• The default passcode is "x-admin".
3 Select [Tools] on the [Services Home]
screen.
Note • When the [Services Home] screen is not
displayed on the touch screen, press the
<Services Home> button.
4 Select [System settings] > [Common Service
Settings] > [Maintenance].
To Next Page
Loading...
Need help?
General
