ESC/P-K Emulation
515
Appendix
14
Font 14
(Alphanumeric
fonts)
Sets the font for single-byte characters.
[0] (Default) : Roman
[1] : Sanserif
Important •Since this feature selects the default value, its setting will not be
affected when an extended command is received.
Print control 51
(Blank sheet
output)
Sets whether to print blank pages if included in the document.
[0] (Default) : Off
[1] : On
Note •Even when [Off] is selected, blank pages are printed if they are
spaces created with user-defined characters or images in white
color.
•When [Off] is selected for this feature and 2 Up or 2 sided printing is
specified, blank pages are not printed.
52
(Character
print area)
Extends the position of the right margin.
[0] (Default) : Standard
[1] : Extended
Important •Changing the character print area from [Extended] to [Standard]
restores the left and right margins to the default values.
• When the position of the right margin is set here, that position
becomes the right edge of the character print area.
53
(Image
enhancement)
Sets whether or not to enable the Image Enhancement feature.
Image Enhancement smoothens the border between black and white,
reducing rough edges, and thus seemingly increasing the resolution.
[0] : Off
[1] (Default) : On
Setting Item
Item
Number
Value
To Next Page
Loading...
Need help?
General
