2 Paper and Other Media
44
Paper and Other Media
2
6 Push the tray in gently until it stops.
Important • When inserting the tray, push it gently.
Forcibly pushing in the tray in may cause
machine malfunction.
Loading an Envelope in Trays 1 to 4
The following describes the procedures to load an envelope in Trays 1 to 4.
1 Lift up the latch of the right hand cover to
open the cover.
2 Press down the lever located at the upper
left corner to set the envelope mode.
Note • To load print media other than envelopes,
lift up the lever as shown in the
illustration.
Note • To load envelopes using the optional
Finisher-AB1, lift up the lever as shown in
the illustration.
To Next Page
Loading...
