5 Tools
204
Tools
5
Line 1 - Company Logo
Register the sender names for line 1. The sender name is printed in the Transmission Header
Text or Cover Page. Enter up to 60 single-byte characters using the keyboard displayed or
the numeric keypad.
G3 Line 1 - Fax ID
When using G3 communications, register the G3 ID. The G3 ID is normally set to the local
terminal fax number.
Specify a G3 ID with up to 20 digits using the keyboard displayed or the numeric keypad.
Note • A G3 ID (fax number) can consist of not more than 20 digits, including 0 to 9, +, and space.
G3 Line 1 - Dial Type
Set the dial type.
îš„Tone
Tone dialing line.
îš„10pps
Pulse dialing line.
G3 Line 1 - Line Type
Set the line type.
îš„PSTN
Subscriber telephone line.
îš„PBX
Private branch exchange.
Internet Fax Control
You can configure the settings related to the Internet fax control.
Internet Fax Path
Set the Internet fax communication path.
îš„Via E-mail Server
Sends e-mail via an SMTP server.
îš„Direct (P2P)
Directly sends to the machine with the Internet Fax feature, without going through an SMTP
server.
You can specify the following two types of e-mail address for the Internet Fax feature:
z
Specifying a host name
@ must be followed by FQDN.
Example: local-part@device.domain.jp
z
Specifying an IP address
@ must be followed by an IP address with brackets.
Example: local-part@[129.249.123.1]
Profile for Broadcast Job
Set the default value for an Internet fax profile when performing an Internet fax broadcast
send.
A profile is specified to restrict attribute information such as image resolution and paper size
for transmissions between Internet Fax-enabled machines.
To Next Page
Loading...
Need help?
General
