14 Appendix
556
Appendix
14
Notes and Restrictions on the Use of the Print Feature
îš„Output of Long Feed Documents
The output of long feed documents is not supported.
îš„PostScript Driver
Some options such as Poster (Photo Enlargement) are not supported by the PostScript
driver. With the Pages Per Sheet (N-Up) feature, you can specify 2, 4, 6, 9, or 16 pages
up, and with or without frame borders.
îš„Printing from Macintosh via USB Connection
When you send a print job from the PostScript driver of Macintosh connected via USB
and the job includes application data with graphic data (EPS file including binary data)
pasted, the machine may misidentify the binary data as protocol data; therefore, the
output of text data may extend for multiple pages.
In this case, select [RAW] for [Adobe Communication Protocol] under [Tools] >
[Connectivity & Network Setup] > [Port Settings] >[USB] to properly print data which
includes EPS files with binary data.
îš„ContentsBridge
With ContentsBridge, you can print PDF, TIFF, JPEG, and XPS data by drag and drop.
To print DocuWorks documents, however, DocuWorks Viewer Light (free distribution)
or DocuWorks 6.0 or later (purchase separately) is required. PDF and TIFF print data
will be transferred to the machine directly, whereas DocuWorks document data will be
first processed by the client computer, and then transferred to the machine and printed.
îš„Text and Photos for Media Print
You can use a commercially available single-slot memory card reader, but the
operation is not guaranteed. When you use a multi-slot memory card reader, only one
of those slots can be recognized. The slot to be used differs depending on the card
readers. Some of the cards and slots of memory card readers may not be used on the
machine, and the operation is not guaranteed.
îš„Thumbnail for Media Print
The Media Print - Photos feature supports Thumbnail view but not Preview. The Media
Print - Text feature supports neither Thumbnail view nor Preview.
îš„Print Jobs while the Control Panel is being Operated
The processing and output speeds of print jobs may slow in the following conditions:
z
The control panel is being operated while the machine processes a print job.
z
The status of a print job is being viewed in the [Job Status] screen.
îš„When the Print Results Differ from the Settings
As in the following cases, insufficient memory for the print page buffer may cause print
result in not printing as specified. In this case, we recommend that you increase the
memory.
z
Printed only on 1 side when 2 sided printing is specified.
z
A job was terminated (If data cannot be written to the print page buffer, the job
including that page is terminated).
îš„Printing from a USB Memory Device
z
You can use a USB host adapter to print from your USB memory device or via your
USB cable (as necessary), but the operation is not guaranteed.
To Next Page
Loading...
Need help?
General
