Configuring Machine Settings Using CentreWare Internet Services
255
CentreWare Internet Services Settings
6
Configuring Machine Settings Using CentreWare Internet
Services
CentreWare Internet Services enables you to change various settings on the machine
from a computer.
Note • Confirm that the port in use is enabled in [Properties] tab > [Connectivity] > [Port Settings] of
CentreWare Internet Services when an item that you want to set is not displayed.
• If you change a setting from CentreWare Internet Services while the control panel is being
used, the change does not take effect until you manually reboot the machine. If [Auto Clear]
is set to [On], the changed items are displayed on the control panel after the machine
reboots. For information about Auto Clear, refer to "Auto Clear" (P.136).
• You may be prompted to enter your user name and passcode when you attempt to change
settings on CentreWare Internet Services. In that case, enter the system administrator's
user ID and passcode into the [User Name] and [Password] fields. The default user ID is
'"11111" and passcode is "x-admin".
You can configure the following settings with CentreWare Internet Services:
Note • For details on the setting items, click [Help] at the upper right corner of the CentreWare
Internet Services screen to see help.
Item How to Select Overview/Reference
Usage Counters Select from [Status] tab
> [Counters]
Displays the total number of pages
printed for each service.
Total Runtime Displays the cumulative time of runtime
(printing or scanning), standby time,
Sleep mode time, warm-up time, and
power-off time of the machine by
minutes.
Job Templates Select from [Scan] tab Allows you to create, edit, copy, or delete
job templates.
Folder Refer to "Create Folder" (P.214).
Add New Name Select from [Address
Book] tab
Refer to "Add Address Book Entry"
(P.223) .
Job Management Select from [Properties]
tab > [General Setup]
Allows you to configure the delete
method of jobs.
Paper Tray Attributes Refer to "Changing the Paper Settings"
(P.50).
Paper Settings Refer to "Changing the Paper Settings"
(P.50).
Energy Saver Settings Refer to "Changing the Interval for
Entering Energy Saver Mode" (P.21).
Stored Job Settings Refer to "Stored File Settings" (P.212).
Memory Settings Refer to "Allocate Memory" (P.182).
Internet Services
Settings
Allows you to configure the display
language of the CentreWare Internet
Services settings.
Cloning Allows you to save the settings of the
machine in a file, and copy the file to the
other machine of the same model but not
to the other models.
To Next Page
Loading...
Need help?
General
