EasyManuals Logo

Fuji Xerox DocuPrint CM505 da Administrator's Guide

Fuji Xerox DocuPrint CM505 da
599 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #493 background imageLoading...
Page #493 background image
Stapler Faults
493
Problem Solving
13
Staple Jams in Staple Cartridge (For Finisher-AB1)
This following describes how to clear staple jam occurred in the staple cartridge of the
Finisher-AB1 (optional).
1 Make sure that the machine is not operating,
and open the finisher front cover.
2 Take the staple cartridge out of the machine.
Note • The staple cartridge is firmly inserted. A
slight force is required to pull the cartridge
out of the finisher.
3 After you take out the staple cartridge, check
inside of the finisher for any remaining
staples.
4 Pull up the metal part of the staple cartridge
as shown in the illustration.
5 Remove the jammed staples (1), and then
return the metal part pulled up in step 4 to
the original position (2).
CAUTION
Be careful in removing jammed staples.

Table of Contents

Other manuals for Fuji Xerox DocuPrint CM505 da

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox DocuPrint CM505 da and is the answer not in the manual?

Fuji Xerox DocuPrint CM505 da Specifications

General IconGeneral
BrandFuji Xerox
ModelDocuPrint CM505 da
CategoryAll in One Printer
LanguageEnglish

Related product manuals