3 Maintenance
58
Maintenance
3
6 Hold the cartridge with the arrow facing up,
and push the cartridge in slowly until it stops.
7 Close the front cover.
Note • If the front cover is not completely closed,
a message will appear and the machine
will remain paused.
Replacing Waste Toner Container
The waste toner container holds used toner. The following messages are displayed on
the touch screen according to the status of the waste toner container. Follow the
messages as necessary.
*1 The remaining page yield for copy/print jobs is applicable when A4 paper is used. The value is an
estimate and varies depending on the conditions such as the content printed, dot coverage (area
coverage), paper size, paper type, copy/print density, output image type, and machine operating
environment.
When replacing the waste toner container, clean the laser scanners located behind the
waste toner container by using the cleaning bar supplied with a new waste toner
container to prevent inconsistencies in density or color in copies and prints.
Message
Page yield after the
message is displayed
*1
Solution
Please order a Waste
Toner Container.
Approx. 2,500 pages Order the waste toner
container.
The Waste Toner
Container needs to be
replaced.
-
The machine will stop. Replace
the waste toner container with
a new one.
z
Use a broom or a wet cloth to wipe off spilled toner. Never use a vacuum cleaner
for the spills. It may catch fire by electric sparks inside the vacuum cleaner and
cause explosion. If you spill a large volume of toner, contact your local Fuji Xerox
representative.
z
Never throw a waste toner container into an open flame. Toner may catch fire and
cause burn injuries or explosion.
If you have a used waste toner container no longer needed, contact your local Fuji
Xerox representative for its disposal.
To Next Page
Loading...
Need help?
General
